The Exposure Triangle: Understanding The Basics

What is The Exposure Triangle?

Before now, we discussed the three primary factors that determine the exposure of a photograph; which are the Aperture, Shutter Speed and ISO. (These factors as stated here have clickable links that would take us to the previous posts where we discussed them in detail just in case we need to refresh our memory).

Now Exposure Triangle is the act of striking a balance between these three variables so as to produce a perfectly exposed image.

APERTURE

The Aperture can be defined as the diameter of the channel through which light passes to get into the image sensor. The Aperture is measured in f-stops. So an Aperture value of f/1.8 has a wide opening while an Aperture value of f/22 has a small opening.

With Aperture comes Depth of Field. The depth of Field here refers to how much of your image is in focus. So shooting with a wider aperture makes less of the image be in sharp focus while shooting with a smaller aperture makes more of the image be in sharp focus.

SHUTTER SPEED

Shutter speed refers to the length of time the shutter is open. So if you’re shooting with a fast shutter speed, for example, 1/1000th of a second, less light gets into the image sensor compared to when you’re shooting with a slow shutter speed of 1/10th of a second which allows more light into the image sensor.

When shooting with a wide aperture, your shutter speed will need to be fast to compensate for the amount of light entering the camera otherwise you’ll most likely end up with an over-exposed image. Same applies if you’re shooting with a small aperture, your shutter speed will need to move slower to enable more light into the camera otherwise you’ll most likely end up with a grossly under-exposed image.

Your shutter speed can also be used to freeze motion. So if you’re taking a photograph of a moving car or a waterfall, using a fast shutter speed freezes the movement. A slower shutter speed will produce a blurry image of the car and a creamy look of the waterfall. These outcomes are not necessarily bad if done creatively.

ISO

This refers to the way your camera interprets light; This is also known as the Image sensor’s sensitivity to light. This sensitivity is measured in figures like 100,200,400,800 etc.

So a camera with a base ISO of 100 means that the best picture quality is to be taken at this setting and this requires enough light and excellent conditions for it to perform. A camera with an ISO setting of 4000 would require less light to take a bright image but this could be at the expense of the quality of the image as there could be the existence of image noise or grainy pixels in the picture.

If you’re taking a photograph in a dimly lit room, you can introduce an external light source like a Speedlite and still operate at a low ISO to ensure the digital noise is kept at it’s barest minimum.

CONCLUSION

In summary, this is an idea of what the exposure triangle is all about. Effective utilization of these three variables; Aperture, Shutter Speed and ISO to produce a perfectly exposed image. So it’s time to pick up our cameras and get practising. You could share your images in the comments section below or on our community lets all learn.

If you have any questions or contributions to make, kindly share your thoughts in the comments section below.

LIKE THIS ARTICLE?

DON’T MISS THE NEXT ONE!

Join over 1,000 photographers of all experience levels who receive our free photography tips and articles to stay current:

ISO : Understanding Exposure in Digital Photography

In today’s editorial, we’ll be looking at ISO as the third primary factor which plays a contributory role in capturing a perfectly exposed image. The first we discussed was Aperture, next we looked at Shutter Speed, and now we’ll be looking at ISO as it relates to Exposure in Digital Photography.

What is ISO?

DSLR Camera sensors have a way of interpreting/responding to light. Their response to light, however, determines how bright or dark the image captured is. This mode or response can be referred to as ISO. ISO is measured in values such as 100,200,400,800 etc and can be controlled automatically or manually via the camera settings.

ISO VALUES EXPLAINED.

Like we mentioned earlier, ISO can be used to control the brightness of an image. The higher ISO values you apply, the brighter your image is. But it gets to a certain value where you begin to notice grains on the image; otherwise known as noise. This noise is acceptable by some photographers while some don’t like it. Personally, I don’t like noise in my images. I love them clear and crisp.

ISO Understanding Exposure in Digital Photography
ISO Understanding Exposure in Digital Photography Aperture f/9 Exposure time 1/160 sec ISO 100, Focal length 50mm

To achieve the highest image quality from your DSLR camera, it’s advisable to stick to the Base ISO. The base ISO here is the lowest ISO value your DSLR camera has. Unfortunately, we can’t always stick to this value at all times due to the conditions in which we’re shooting especially in low-light conditions.

What ISO value is best for you?

Pick up your camera and start experimenting. Set your Aperture to around F4 and your shutter speed to about 1/160th sec and ISO set to your base ISO. Start taking pictures with varying ISO values until you get to a point where the noise/grains are unacceptable. That would then give you an idea of the best acceptable ISO value for you to shoot at using your DSLR camera.

Conclusion

This is just a basic knowledge of ISO as related to Exposure in Digital Photography. We’ll go deeper into how it can be controlled when we discuss the Exposure Triangle.

LIKE THIS ARTICLE?

DON’T MISS THE NEXT ONE!

Join over 1,000 photographers of all experience levels who receive our free photography tips and articles to stay current: